The pinnacle of the low profile baitcast realm. Daiwa has always produced the upper echelon of casting reels in style and performance - and the new Morethan is no exception. Made in Japan you know this reel will truly impress.

Restyled and resized the Morethan PE TW delivers anglers the strongest baitcaster in its class. The solid alloy frame and gear side plate deliver a rigid body, minimising flex and promoting confidence.

Made from alloy the Morethan’s new lightweight, low profile frame has been lightened to optimise balance whilst losing nothing in strength and rigidity. Designed with lightness and strength in mind and gifted with many of Daiwa’s newest and most advanced baitcaster technologies, the Morethan PE TW is a reel that’ll appeal to those looking for a workhorse reel they can depend upon.

TWS leads the run sheet of designs, with its innovative pivoting t-shaped line guide delivering unparalleled casting performance and line control. The T-Wing System creates less line angle from the spool in comparison to conventional line guides. The reduction in friction created as line comes off the spool greatly improves casting distance and line control. Magforce Z is tuned to maximise performance with PE (braided) line.

A precision designed solid aluminium frame and gear side plates deliver maximum power, unrivalled durability and reliability, while the Morethan’s ergonomically designed profile fits beautifully in the palm of the hand for ultimate comfort and control.

Daiwa’s most advanced gear design, Hyper Digigear, delivers its unprecedented power to a bait caster of this size. Delivering a powerful reel with an 8.6:1 ratio is difficult, but not for Hyper Digigear. This special brass alloy delivers the longevity and power needed to wrench down on the 100mm handle and crank at high speeds. Air Rotation system to create a reel that has few peers when it comes to smoothness. Silky smooth on the crank and flawless under load the Morethan PE TW is purity and precision in true Daiwa style.

Setting the reel for optimum casting control has become easier with the Morethan PE TW, with Daiwa’s new Zero Adjuster eliminating the need to adjust the spool tension knob for optimum casting performance. Zero Adjuster paired with Magforce Z cast control adjusts easily to any skill level to control backlash, and allows the spool to start up faster, and spin longer for easier and longer casts.

Cranking performance is essential for controlling your baits and fish, and the Morethan PE TW has it in spades thanks to its Swept Handle design. The 100mm handle delivers maximum cranking power, while its swept handle brings the cranking handle closer to the reel’s centre of balance for increased balance, power and performance. Redesigned soft touch knobs complete the handle assembly and enhance control and comfort like only Daiwa can.

Small and compact in size yet big in strength, design, and performance the Morethan PE TW is a reel that is going to become a favourite among many anglers!!

Product Features:

100mm HANDLE

ALLOY HANDLE

Light, yet strong, and highly corrosion resistant this a handle that’s the great all-rounder and suited to most applications.

ALUMINIUM BODY

Lightweight and incredibly strong, aluminium allows strength and weightless to be achieved without the cost and corrosion issues of other metals such as magnesium.

ATD-DRAG

Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest yet becomes more viscous immediately after drag start up. This reduces initial drag start-up inertia and combined with the structural changes of the ATD Drag System results in a smoother drag from the initial hook up.

CLICKING DRAG

A drag system that produces a clicking sound when a fish runs and takes drag.

CRBB

Lasting 12 times longer than standard stainless-steel bearings Daiwa’s CRBBs feature specially treated stainless steel, and a protective shield on the bearing race that seals out sand, fine grit, salt crystals and other abrasives. The result is a longer lasting bearing that’s protected from the corrosive elements that destroy traditional bearings.

G1 SPOOL

Lighter and faster than traditional spools a G1 duraluminium spool allows for faster spool start-up and slowdown, and improved rotational balance.

HYPER-DIGIGEAR

Featuring, Daiwa’s famous machine cut gear system, Hyper Digigear, results in silky smooth precision meshing between the main and pinion gear. Ultra-tough, surface treated, high tensile alloy drive gear and marine bronze pinion gear allow for increased gear teeth accuracy and improved gear meshing, smoothness, and strength.

INFINITE ANTI REVERSE

Daiwa's advanced system that limits rearward backplay handle movement to almost zero for solid hooksets with less shock to the reel. The result is the elimination of handle slap-back and the unwanted release of line.

MADE IN JAPAN

Made in Japan

MAGFORCE Z

The next generation of Daiwa’s magnetic anti-backlash system like Magforce V before it combines the best aspects of modern magnetic and centrifugal breaking, albeit with some slight differences. Unlike Magforce V magnetic braking is only applied at maximum spool speed, as a result it allows the spool to reach a higher peak speed and allows it to spin for longer. Magforce Z is considered to be best suited to longer casting pursuits and heavier weights.

MAGSEALED-BEARINGS

MagSeal protection is no longer just for the main shaft and rotor of a reel with MagSealed Ball Bearings providing ultimate protection for the most at-risk location such as the engine side plate and line roller.

TWS

Daiwa’s revolutionary T-Wing System addresses the issue of traditional line guide/level wind systems constricting line flow by delivering a T-shaped line guide that is larger, wider and less restrictive. TWS allows line to exit freely from the spool with minimal line angle, minimal friction and constriction, thereby reducing line noise and backlash, and delivering more accurate and longer casts.

ZERO ADJUSTER

Thanks to the revolutionary SV-Concept, it is no longer necessary to adjust the Mechanical Spool Brake Knob when casting. Perfect Zero Adjuster setting is when the spool shaft is held without side to side spool play. Appropriate brake power adjustment is now fully manageable with only the use of the Magnetic dial.

Product Specifications: